peate@gaodetec.com Gaode Equipment Co., Ltd.
  • Home
  • /
  • News
  • /
  • How to troubleshoot and repair industrial hose pumps

How to troubleshoot and repair industrial hose pumps

Building hose pumps are being used in a growing number of fields to transport a variety of fluids. Inevitably, there will be abnormal situations in use, such as burst pipes, insufficient pressure, etc. So what do you do when something goes wrong? Let's summarize the common problems.
  
How to troubleshoot and repair industrial hose pumps
  
First, burst pipe
  
Generally speaking, industrial hose pump plant is in accordance with customer requirements, can achieve the use of requirements, in the case of later use will burst pipe, extrusion pump hose normal operating life in 1000-1500 hours, can be used for such a long time is normal loss, but if significantly less than this time (such as more than 100 hours), this situation is to check the pump body and transmission lines, generally due to excessive pressure caused, first check whether the pump wheel is normal, and then squeeze the wheel clearance is not normal, no normal operation of the squeeze wheel , then check that the entire conveyor tube tube tube is blocked.
  
Second, there's not enough pressure.
  
Check the squeeze wheel clearance, if the gap becomes larger, resulting in insufficient pressure, adjust the squeeze wheel clearance until the desired pressure is reached. Then check the pipe for abnormalities, such as leaks.
  
Third, there is not enough traffic.
  
1. Check that the squeeze wheel clearance is too large
 
2. Check that the suction port is normal and that the supply of raw materials is adequate
 
3. Check the tube for leaks and if the valve is closed
 
Fourth, there is abnormal noise in machine operation
  
Listen carefully to the noise source next to the machine, determine the possible problem based on the type of noise, and then stop checking.
 
1. First check that each wheel rotates properly and does not get stuck
 
2. Then check to see if any foreign objects have fallen like inside the pump shell
 
3. Check the transmission again for abnormalities.

 

In order to recommend you more suitable models peristaltic pump, please let us know clearly about your requirements:
1. What is the project with our peristaltic pump, is it for pumping concrete or others?

2. What is the pressure and output you require?

3. What is the local voltage you require, here the voltage 380V, 50HZ, 3phase, is it ok for you?

4. What is max. aggregate size in the slurry?
 

contact us.jpg


Get Price or Support