Hose pump consists mainly of pump house, rotor, roller, idle roller, squeeze tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries. GH100-915B super high pressure hose pump adopts special process squeeze hose, working pressure could be up to 26bar.
1.No Seals, No valves
3.Only tube to replace
4.Dry-running without damage
6.No contact between product and mechanical parts
7.Able to pump products with solid parts inside
8.Easy maintenance, low-cost, short down time.
|Max. Pressure||26 bar|
|Squeeze Hose ID||100mm|
|Max. Aggregate Size||20mm|
|Max. Suction Lift||5m|
|Motor Power||45 KW|